cmc_logo_sm.gif (6846 bytes)
cmc_banner1.gif (5349 bytes)
cmc_divider2.gif (1135 bytes)
white_spacer_5x12.gif (818 bytes)

Aluminum Dip Brazing
cmc_divider2.gif (1135 bytes)
white_spacer_5x12.gif (818 bytes) COLEMAN MICROWAVE CO. is an industry approved source for aluminum dip brazing, welding, heat treating, and chemical film coating. Aluminum dip brazing is the preferred means of fabricating aluminum assemblies. Offering superior joints as strong as the base metal. Dip brazing utilizes uniform heating, resulting in little or no physical distortion. Complex assemblies can hold tolerances as low as +/- .005 on sheet metal assemblies (Depending on the fixturing and method of fabrication) though typical tolerances are +/-.010. Brazed joints with tolerances +/- 0.002 inch or less are commonplace in MICROWAVE COMPONENT production.

 
. cmc_divider3.gif (2725 bytes)
. white_spacer_5x12.gif (818 bytes)| Home | Contact Us | Feedback | Products | Services | Sales Offices | Facilities |

Copyright © 2001, Coleman Microwave Company
P.O. Box 247 - Edinburg, VA 22824
Website Design by Jim Flis